Statistics
| Branch: | Revision:

adafruit_bno055 / examples / bunny / bunny.ino @ cac43ed4

History | View | Annotate | Download (3.977 KB)

1
#include <Wire.h>
2
#include <Adafruit_Sensor.h>
3
#include <Adafruit_BNO055.h>
4
#include <utility/imumaths.h>
5

    
6
/* This driver uses the Adafruit unified sensor library (Adafruit_Sensor),
7
   which provides a common 'type' for sensor data and some helper functions.
8

    
9
   To use this driver you will also need to download the Adafruit_Sensor
10
   library and include it in your libraries folder.
11

    
12
   You should also assign a unique ID to this sensor for use with
13
   the Adafruit Sensor API so that you can identify this particular
14
   sensor in any data logs, etc.  To assign a unique ID, simply
15
   provide an appropriate value in the constructor below (12345
16
   is used by default in this example).
17

    
18
   Connections
19
   ===========
20
   Connect SCL to analog 5
21
   Connect SDA to analog 4
22
   Connect VDD to 3.3-5V DC
23
   Connect GROUND to common ground
24

    
25
   History
26
   =======
27
   2015/MAR/03  - First release (KTOWN)
28
*/
29

    
30
/* Set the delay between fresh samples */
31
#define BNO055_SAMPLERATE_DELAY_MS (100)
32

    
33
Adafruit_BNO055 bno = Adafruit_BNO055(55);
34

    
35
/**************************************************************************/
36
/*
37
    Displays some basic information on this sensor from the unified
38
    sensor API sensor_t type (see Adafruit_Sensor for more information)
39
*/
40
/**************************************************************************/
41
void displaySensorDetails(void)
42
{
43
  sensor_t sensor;
44
  bno.getSensor(&sensor);
45
  Serial.println("------------------------------------");
46
  Serial.print  ("Sensor:       "); Serial.println(sensor.name);
47
  Serial.print  ("Driver Ver:   "); Serial.println(sensor.version);
48
  Serial.print  ("Unique ID:    "); Serial.println(sensor.sensor_id);
49
  Serial.print  ("Max Value:    "); Serial.print(sensor.max_value); Serial.println(" xxx");
50
  Serial.print  ("Min Value:    "); Serial.print(sensor.min_value); Serial.println(" xxx");
51
  Serial.print  ("Resolution:   "); Serial.print(sensor.resolution); Serial.println(" xxx");
52
  Serial.println("------------------------------------");
53
  Serial.println("");
54
  delay(500);
55
}
56

    
57
/**************************************************************************/
58
/*
59
    Arduino setup function (automatically called at startup)
60
*/
61
/**************************************************************************/
62
void setup(void)
63
{
64
  Serial.begin(115200);
65
  Serial.println("Orientation Sensor Test"); Serial.println("");
66

    
67
  /* Initialise the sensor */
68
  if(!bno.begin())
69
  {
70
    /* There was a problem detecting the BNO055 ... check your connections */
71
    Serial.print("Ooops, no BNO055 detected ... Check your wiring or I2C ADDR!");
72
    while(1);
73
  }
74

    
75
  delay(1000);
76

    
77
  /* Display some basic information on this sensor */
78
  displaySensorDetails();
79
}
80

    
81
/**************************************************************************/
82
/*
83
    Arduino loop function, called once 'setup' is complete (your own code
84
    should go here)
85
*/
86
/**************************************************************************/
87
void loop(void)
88
{
89
  /* Get a new sensor event */
90
  sensors_event_t event;
91
  bno.getEvent(&event);
92

    
93
  /* Board layout:
94
         +----------+
95
         |         *| RST   PITCH  ROLL  HEADING
96
     ADR |*        *| SCL
97
     INT |*        *| SDA     ^            /->
98
     PS1 |*        *| GND     |            |
99
     PS0 |*        *| 3VO     Y    Z-->    \-X
100
         |         *| VIN
101
         +----------+
102
  */
103

    
104
  /* The processing sketch expects data as roll, pitch, heading */
105
  Serial.print(F("Orientation: "));
106
  Serial.print((float)event.orientation.x);
107
  Serial.print(F(" "));
108
  Serial.print((float)event.orientation.y);
109
  Serial.print(F(" "));
110
  Serial.print((float)event.orientation.z);
111
  Serial.println(F(""));
112

    
113
  /* Also send calibration data for each sensor. */
114
  uint8_t sys, gyro, accel, mag = 0;
115
  bno.getCalibration(&sys, &gyro, &accel, &mag);
116
  Serial.print(F("Calibration: "));
117
  Serial.print(sys, DEC);
118
  Serial.print(F(" "));
119
  Serial.print(gyro, DEC);
120
  Serial.print(F(" "));
121
  Serial.print(accel, DEC);
122
  Serial.print(F(" "));
123
  Serial.println(mag, DEC);
124

    
125
  delay(BNO055_SAMPLERATE_DELAY_MS);
126
}